I want to install the artificial grass at the entrance of my house which is made of wood.
![]() | Jan 16, 2020 1:20 AM |
Yes, you can. Depending on what type of staple gun you are using, you have to pay attention to the following:
1. You would like to use the narrower staples as they won't crush down the fibers as much
2. You need to make sure not to drive the staples into plywood too tight as the top cross section of staples will catch some fibers and press them down, if your staples are too tight into the plywood, you won't be able to flip the fibers out of the staple heads.
3. You will need to have a pin to pinch out fibers pressed down by the staples otherwise, you might notice the denting areas where staples been used.
![]() | Darryl Malcomson I don't see any reason why you couldn't use a staple gun |